Slag dryer
NPK ENERGOTEK LLC designs and manufactures slag dryers.
TYPES OF SLAG:
nickel slag;
manganese slag;
titanium slag;
copper slag;
blast furnace slag;
steelmaking slag.
The Energotek company has the ability to design and manufacture any drying drum with productivity in the range from 1 ton per hour to 35 tons of slag per hour . If higher productivity is required, our company is ready to offer modular slag drying complexes with a capacity of 70 tons per hour to 500 tons of slag per hour .
FEATURES OF OUR SLAG DRYERS:
Drying drum for drying slag , must be aggregated with a heat generator operating either on gaseous fuel (natural gas, propane-butane mixture), or on liquid (diesel fuel, fuel oil, various synthetic boiler / furnace fuels, water-coal fuel), or on solid (wood-burning furnaces, coal furnaces, multi-fuel (operating both on pellets, briquettes from wood raw materials, agricultural raw materials, and on wood chips, firewood, coal - drill, anthracite, coals of grades D and D), pulverized coal injection installations).
Heat generators operating on natural gas are the easiest to maintain and technologically advanced. They can be fully automated and do not require constant monitoring. The only drawback is the cost of natural gas in Ukraine. The cost of drying is 1.5-3 times higher than when working on solid fuels or liquid (synthetic furnace fuels, pyrolysis products of tires, oils). The most significant savings can be achieved using solid fuel heat generators. Among them, the best price / cost ratio * technological effectiveness is possessed by a pulverized coal-fired heat generator. And the most economical will be a heat generator operating on briquettes from sunflower husk and also on brown coal (pieces of 20-100mm).
IMPORTANT:
However, heat generators have significant disadvantages.
So, for example, all solid fuel heat generators require a stoker for timely fuel supply and ash removal. When using a wood-fired heat generator, it is necessary to constantly monitor the moisture content of the incoming firewood, otherwise the required thermal power for the drying process will be impossible. You also need a permanent warehouse for firewood with a week's supply, if you do not have a nearby permanent source of firewood and a firewood preparation area (unloading, sawing, sorting). For example, for a heat generator with a capacity of 1-1.5 MW, the required amount of firewood is 25-37 cubic meters per day, which is equivalent to 1 truck. Thus, it turns out that, depending on the wishes and needs of the customer, the type of heat generator used is not always obvious. Sometimes it is more expedient to install a heat generator that runs on diesel fuel, or on natural gas and not have unnecessary trouble.
Also, in addition to the heat generator, for the operation of the drying drum , a smoke exhauster is needed , which ensures the suction of the necessary air for combustion, its passage through the drying drum, cyclone and the evacuation of moisture evaporated from the slag. For each capacity in tons per hour, taking into account the moisture content of the slag at the inlet and outlet of the drying drum, the rheological properties of the slag, porosity, etc., a smoke exhauster is specially calculated, designed and manufactured with the required parameters.
The third necessary element for the correct conduct of the slag drying process is the presence of a dust-precipitating cyclone . Dry slag is a highly dusty material and therefore requires a dust cleaning system. The cyclone parameters depend on the capacity of the drying drum, the amount of moisture removed from the material, the type of heat generator used.
Therefore, in each individual case, depending on the configuration, we select the cyclones individually.
When buying equipment from our company we provide all the necessary documents - a data sheet, an operation manual, installation and aggregation schemes with feeding and unloading material. We also provide any feasible advisory assistance in the preparation of project documentation for coordination with government agencies.
Dryer warranty - 24 months. After the end of the warranty - discount service.