top of page

Belt - Scraper Conveyor

ленточно-скребковый транспортер

Scraper belt conveyor

We produce belt-scraper conveyors with a productivity from 0.5 to 500 tons per hour . For all industries and agriculture. Unlike chain conveyors with scrapers, which move the material from below along the chute, in this conveyor the scrapers are placed on top of the belt and the material lies on top, while the scrapers are kept from spilling against the direction of travel. This allows you to ensure the best safety of the material from cracking, abrasion, which is very important when transporting various granular materials, pellets, grains, etc. The scrapers can be made from rubber in the form of chevrons or from metal plates.

The length of the conveyor , depending on the needs of the customer, can be from 0.5 to 300 meters .

Conveyor width from 200 mm to 1000 mm .

The maximum permissible angle of inclination of the conveyor depends on the flowability of the material and ranges from 25 degrees to 55 degrees. An ideal option for the transportation of any bulk (both wet and dry), lumpy and lumpy materials.


Installation of various sensors - movement, belt breakage - as agreed with the customer.

A variant of execution in the form of a steeply inclined conveyor using a belt with corrugated sides is possible.

All necessary documents are attached to the conveyor.

Technical passport, operation manual, assistance in the preparation of project documentation.

The warranty is 12 months .

After the end of the warranty - discount service.

Conveyor characteristics

Basic Attributes

  • Manufacturer: Energotek

  • Country of origin: Ukraine

  • Type of transported cargo: Bulk

  • Conveyor type by the presence of a traction mechanism: With a traction mechanism

  • Traction Conveyor Type: Belt

  • Type of conveyor on the load-carrying mechanism: Scraper

  • The principle of moving the load on the conveyor: On a continuous belt

  • Warranty period: 12 (months)

Ordering information

Packing method: Without packing.

Shipment to the customer's vehicle.

bottom of page